Productgegevens
Plaats van herkomst: China
Merknaam: Vanka
Certificering: ISO9001:2015,CE
Betaling en verzendvoorwaarden
Min. bestelaantal: 50 sets
Prijs: $5-$10 Sets
Verpakking Details: 570x340x165
Levertijd: 30 werkdagen
Betalingscondities: L/C, T/T, Western Union, MoneyGram
Levering vermogen: 20000 set/sets per maand
Type: |
Geëvacueerde buis, zonnewielonderdelen, platte plaat, onder druk, andere |
Woningmateriaal: |
Roestvrij staal, plastic, koper, gekleurd staal, gegalvaniseerd staal |
Installatie: |
Vrijstaande, muur gemonteerd, direct inzetstuk |
circulatietype: |
Directe / open lus (actief), andere |
Type verbinding: |
Direct-plug, split, andere |
Capaciteit: |
200.300.100 (L), 100L, 150 |
Druk: |
Niet -onderdrukte, gemiddelde druk |
Toepassing: |
Boiler, huisgebruik, badkamer/keuken/appartement/ziekenhuis/school/fabriek, generaal, thermische con |
Verwarmingssysteem: |
Thermosyphon (passief), batch / ICS (passief) |
Materiaal: |
Koolstofstaal, borosilicaat glas3.3, T2 rood koper, plastic, abs |
Kleur: |
blauw, groen, zoals je nodig hebt, zilver, rauw |
Gebruik: |
Zonne -watertank en vacuümbuis, accessoires voor zonneboiler, overheid, woonwijken, zwembad |
Naam: |
Platte plaat zonnecollector, vorstklep, compacte niet-gedrukte zonneboiler, zonnestelerregelaar, zon |
Productnaam: |
Hoogwaardige accessoires voor zonneboiler voor zonneboilers, zonneboiler controller TK-7, onder druk |
Item: |
Zonne-boiler controller TK-7, vacuümbuis zonnecollector, hot sale energie-efficiënte nieuw ontwerp z |
Kader: |
45 roestvrij staal, roestvrij staal SUS201-1.2 mm/ gegalvaniseerd staal-1,5 mm, gegalvaniseerde stal |
Garantie: |
5 jaar duurzame Solaris zonneboiler, 5 jaar, 10 jaar, 10 jaar zonder menselijke schade en overmacht. |
Binnentank: |
Sus304-2B roestvrij staal, roestvrij staal SUS304-0,5 mm |
Vacuümbuis: |
58 mm/1800 mm, QB-Al-N/AL-47-1500, vacuümbuis 58*1800 of 47*1500 |
Type: |
Geëvacueerde buis, zonnewielonderdelen, platte plaat, onder druk, andere |
Woningmateriaal: |
Roestvrij staal, plastic, koper, gekleurd staal, gegalvaniseerd staal |
Installatie: |
Vrijstaande, muur gemonteerd, direct inzetstuk |
circulatietype: |
Directe / open lus (actief), andere |
Type verbinding: |
Direct-plug, split, andere |
Capaciteit: |
200.300.100 (L), 100L, 150 |
Druk: |
Niet -onderdrukte, gemiddelde druk |
Toepassing: |
Boiler, huisgebruik, badkamer/keuken/appartement/ziekenhuis/school/fabriek, generaal, thermische con |
Verwarmingssysteem: |
Thermosyphon (passief), batch / ICS (passief) |
Materiaal: |
Koolstofstaal, borosilicaat glas3.3, T2 rood koper, plastic, abs |
Kleur: |
blauw, groen, zoals je nodig hebt, zilver, rauw |
Gebruik: |
Zonne -watertank en vacuümbuis, accessoires voor zonneboiler, overheid, woonwijken, zwembad |
Naam: |
Platte plaat zonnecollector, vorstklep, compacte niet-gedrukte zonneboiler, zonnestelerregelaar, zon |
Productnaam: |
Hoogwaardige accessoires voor zonneboiler voor zonneboilers, zonneboiler controller TK-7, onder druk |
Item: |
Zonne-boiler controller TK-7, vacuümbuis zonnecollector, hot sale energie-efficiënte nieuw ontwerp z |
Kader: |
45 roestvrij staal, roestvrij staal SUS201-1.2 mm/ gegalvaniseerd staal-1,5 mm, gegalvaniseerde stal |
Garantie: |
5 jaar duurzame Solaris zonneboiler, 5 jaar, 10 jaar, 10 jaar zonder menselijke schade en overmacht. |
Binnentank: |
Sus304-2B roestvrij staal, roestvrij staal SUS304-0,5 mm |
Vacuümbuis: |
58 mm/1800 mm, QB-Al-N/AL-47-1500, vacuümbuis 58*1800 of 47*1500 |
High-energy 220V thermostatic pulse igniter designed for forced-exhaust gas water heaters. Features powerful pulse output and thermostat-compatible interface for fast, reliable ignition. Dual-pulse protection and multiple safety checks prolong service life and improve reliability. Easy to install and compatible with many forced-vent heater models.
Fast Ignition: High-energy pulse output ensures instant ignition with zero delay
Precise Control: Compatible with thermostat interface for accurate water temperature adjustment
High Success Rate: Dual pulse and dual safety ignition logic for more reliable ignition
Enhanced Safety: Multiple protections including flameout detection, over-voltage, and short-circuit protection
Easy Installation: Simple setup, compatible with various forced-exhaust gas water heaters
Item | Specification |
---|---|
Input Voltage | AC 220V ±10% |
Output Voltage | 12–15 kV (High-Voltage Pulse) |
Operating Frequency | 50/60 Hz |
Ignition Method | Pulse Ignition (Single/Dual Pulse Optional) |
Compatible Type | Forced-Exhaust Gas Water Heaters (Thermostatic/Standard) |
Protection Rating | IPX0 (Waterproof version optional) |
Operating Temperature | -10℃ ~ +60℃ |
Service Life (Typical) | ≥100,000 Ignitions (Depending on Use) |
Wiring | Input Wire, Ground, Thermostat Signal Wire, Ignition Output Wire |
Dimensions (Typical) | 60 x 41 x 29 mm (Example) |
Weight (Typical) | 100–120 g |
Q1: Which water heaters are compatible with this igniter?
A1: This module is specifically designed for forced-exhaust (fan-assisted) gas water heaters. It is compatible with most 220V-powered models that have thermostat/temperature control interfaces. For exact compatibility, please provide the wiring diagram or the heater model number.
Q2: Does installation require a technician?
A2: If you have basic electrical and gas appliance safety knowledge, you can replace the wiring according to the manual. If not, it is strongly recommended to have a professional technician perform the installation to ensure safety.
Q3: What should I do if ignition fails?
A3: First, check whether the power supply, grounding, and gas source are normal, and whether the spark electrode gap (recommended 8–12 mm) is correct. If the issue persists, replace the ignition module or contact after-sales support.
Q4: Is there a waterproof version available?
A4: Yes, some models are available with waterproof or moisture-resistant treatment. If the product will be exposed to humid environments, it is recommended to choose a waterproof version.
Q5: What is the warranty period?
A5: The standard warranty is 12 months (depending on supplier). Please note that non-original modifications or damage caused by human error are usually not covered under warranty.